Decorative Coating & Topcoat

Sold by: 1 gallon can with ears. CHEMGLAZE Z306 is a single-component, moisture-curing polyurethane coating. CHEMGLAZE Z306 is used in industrial applications and cures to a flat black finish. Requires AEROGLAZE 9958 thinner. Item Weight: 8.64...

Sold by: pail.CHEMGLAZE Z306 is a single-component, moisture-curing polyurethane coating. CHEMGLAZE Z306 is used in industrial applications and cures to a flat black finish. Requires AEROGLAZE 9958 thinner.Item weight: 44.52...

Sold by: 1 gallon can with ears.CHEMGLAZE Z451 is an aromatic, moisture curing, single-package, ASTMD-16 Type II, oil-free product. The product is recommended for interior applications. Use: to protect metal surface coated with a primer or another...

Sold by: 0.73 Kg.FUN NG GREEN 40462 is a two-component, solvent-based epoxy varnish primarily used as a cosmetic touch up coating of alodine 1200. Requires FUN NG PART B curative as well as DL 162 thinner. Item Weight: 0.92 KGM / 2.02...

Sold by: 0.485 Kg. Chromate and lead free polyurethane paint for engine parts (housing, blades, OGV). Good anti-erosion properties. Aviation fluid resistant. Item Weight: 1.33 KGM / 2.974 LBSTDSLBY_216_MATT_TDS_FRENCH.PDFLBY_216_MATT_TDS_ENGLISH.PDF

Sold by: 0.250 Kg.LBY 216 PART B is the curative component required for use with LBY 216. Item Weight: .256KGM / .56LBSTDSLBY_216_MATT_TDS_FRENCH.PDFLBY_216_MATT_TDS_ENGLISH.PDF

Sold by: 0.2 Kg.LBYH 142 PART B is the curative component required for use with LBYH 142. Item Weight: .2 Kg / .44 LBSTDSLBYH_142_TDS_FRENCH.PDFLBYH_142_TDS_ENGLISH.PDF

Sold by: 0.8 Kg.LBYH 142 is a two-component, water-based polyurethane topcoat with excellent UV and chemical resistance. Designed to adhere directly to composite substrates. Requires LBYH 142 PART B curative as well as DL 1511. Item Weight: 0.8Kg / 1...

SOCOGLAZE PT-766 comes in a rough texture, with grit, as TYPE II. SOCOGLAZE PT-766 is a unique formulation of high molecular urethane resins, which cures at ambient temperatures. Approvals and conformities: MIL-SPEC A-A-59166A Ty. II

A-A-59166 (PT-766) has been authorized by GSA as a replacement for MIL-W-5044 TY. I and TY. II. PT-766 is a non-slip coating used for walkways on exterior aircraft surfaces. PT-766 comes is a smooth texture (without grit) as TYPE I and a rough texture...

PT-483 Epoxy Propeller Coating is a general purpose epoxy aerosol. It is intended for use over metal and composite surfaces that are bare, scuffed, sanded, abrasive blasted, primed and previously painted surfaces while showing excellent protection.

PT-785 is a two component high solids low voc catalyst cure aliphatic polyurethane which meets and exceeds MIL-PRF-85285D Type 1 CLASS H. When mixed and reduced according to PTI’s instructions, PT-785 topcoat will conform to most of California’s air...