SOCOGLAZE

PT-605 Techlube Grease – This is a silicone base grease with a high pigmentation of microfine molybdenum disulfide. It is heat stable and will not decompose or form a gum deposit. It is effective...

PT-650 Tooth Marking Grease is an ester based oil with high pigmentation loading. Although PT- 650 has the consistency of a thick paste, it may be thinned or thickened to meet your requirements.

PT-522 Zinc Chromate Primer is a general purpose, rust inhibitive, alkyd primer. It is intended for use over metals that are bare, scuffed, sanded, lightly rusted, abrasive blast and previously...

PT-605 Techlube Grease – This is a silicone base grease with a high pigmentation of microfine molybdenum disulfide. It is heat stable and will not decompose or form a gum deposit. It is effective...

For all PT-785 36375 inquiries, please reach out to our customer service department at csr-na@socomore.com for a quote or help with order placement. PT-785 is a two component high solids low voc...

PT-799 is a two component catalyst cure aliphatic polyurethane which meets, and exceeds, MIL- PRF-85285D/E Type I & II. When mixed and reduced according to PTI’s instructions, PT-799 topcoat will...

PT-799 is a two component catalyst cure aliphatic polyurethane which meets, and exceeds, MIL- PRF-85285D/E Type I & II. When mixed and reduced according to PTI’s instructions, PT-799 topcoat will...

PT-799 is a two component catalyst cure aliphatic polyurethane which meets, and exceeds, MIL- PRF-85285D/E Type I & II.  Approvals and conformities: MIL-SPEC MIL-PRF-85285E TYI & II...

For all PT-799 37875 inquiries, please reach out to our customer service department at csr-na@socomore.com for a quote or help with order placement. PT-799 Polyurethane is a high-performance,...

PTI PT-900 additive is formulated to help epoxy and polyurethane topcoats flow to their maximum ability. This additive keeps the coating from “Orange Peel” and other surface defects that may occur.

SOCOGLAZE A-A-2787 14064A GLOSS GREEN AEROSOL 13OZApprovals and conformities:MIL-SPEC A-A-2787 TYI

SOCOGLAZE A-A-2787 17043A GLOSS GD ENAMEL AERO 13OZApprovals and conformities:MIL-SPEC A-A-2787 TYI

SOCOGLAZE A-A-2787 17178-A GLOSS GY ENAMEL AERO 13OZApprovals and conformities:MIL-SPEC A-A-2787 TYI

SOCOGLAZE A-A-2787 17875A GLOSS WT ENAMEL AERO 13OZApprovals and conformities:MIL-SPEC A-A-2787 TYI

SOCOGLAZE A-A-2787 26134A SEMI-GLOSS GRAY AERO 13OZApprovals and conformities:MIL-SPEC A-A-2787 TYI

SOCOGLAZE A-A-2787 36118A FLAT GRAY ENAMEL AERO 13OZApprovals and conformities:MIL-SPEC A-A-2787 TYI

SOCOGLAZE A-A-2787 36231ABX FLAT GRAY ALKYDApprovals and conformities:MIL-SPEC A-A-2787 TYI

SOCOGLAZE A-A2787 10075 GLOSS BROWN AEROSOL 13OZ

SOCOGLAZE A-A2787 11136 GLOSS RED ENAMEL AEROSOL 13OZ

SOCOGLAZE A-A2787 13638 GLOSS YELLOW ALKYD AEROSOL 13OZ

The clear cellulose-acetate-butyrate dope furnished under this specification is intended for use as a protective undercoat on airplane fabric surfaces and for making repairs to doped fabric surfaces...

The clear cellulose-acetate-butyrate dope furnished under this specification is intended for use as a protective undercoat on airplane fabric surfaces and for making repairs to doped fabric surfaces...

SOCOGLAZE PRIMER WB413 is a two-part water-based epoxy primer. It is a chromate free anticorrosion / adhesion primer, overcoatable with polyurethane paints. Benefits: Excellent resistance to water...

SOCOGLAZE EPC WB541 is a two-part water-based anti-erosion paint for aircraft parts susceptible to erosion. Benefits: Excellent sand erosion resistance. Good water erosion resistance. Aviation fluid...

SOCOGLAZE EPC WB541 is the base component of a two component, water-based polyurethane, anti-erosion paint for aluminum and composites. Benefits: Excellent sand erosion resistance. Good water...

SOCOGLAZE A-A2797 37038 BK ALApprovals and conformities:MIL-SPEC A-A-2787 TYI

SOCOGLAZE TT-L-50TYIA AERO CL

SOCOGLAZE TT-L-50TYII 2-OZ

SOCOGLAZE TT-L-50TYIIA AERO CL

SOCOGLAZE TT-L-50TYII GLOSS RG

SOCOGLAZE TT-L-50TYII GLOSS RP

SOCOGLAZE TT-L-50TYII GLOSS QT

SOCOGLAZE CC-750-5 24087 SG GN

SOCOGLAZE MIL-E-22118B is a high performance, single component enamel topcoat. It covers onetype and grade of an insulting enamel for use on electrical equipment. It can also be used as a...

SOCOGLAZE MIL-T-18362 GALApprovals and conformities:MIL-SPEC MIL-T-18362

SOCOGLAZE POLYKICK 2OZ

SOCOGLAZE POLYKICK is a paint additive formulated to accelerate the air dry time of two component polyurethane topcoat systems. While this product reduces dry times it will not accelerate chemical...

SOCOGLAZE POLYKICK is a paint additive formulated to accelerate the air dry time of two component polyurethane topcoat systems. While this product reduces dry times it will not accelerate chemical...