Specialty Coating

SOCOGLAZE PT-766 comes in a rough texture, with grit, as TYPE II. SOCOGLAZE PT-766 is a unique formulation of high molecular urethane resins, which cures at ambient temperatures. Approvals and conformities: MIL-SPEC A-A-59166A Ty. I

Sold by: 7.571 L.PT-799 is a two-component, polyurethane topcoat designed for exterior use on aircraft as well as various industrial applications. The coating has excellent resistance to hydraulic jet fluid, fuel, crude oil, salt, ultraviolet rays and...

Sold by: 3.785 L.PT-799 is a two-component, polyurethane topcoat designed for exterior use on aircraft as well as various industrial applications. The coating has excellent resistance to hydraulic jet fluid, fuel, crude oil, salt, ultraviolet rays and...

SOCOGLAZE PT-785 11136 RD QT KApprovals and conformities:MIL-SPEC MIL-PRF-85285D TYI & MIL-C-85285BMS 10-60N TYI GR D

Sold by: 1 gallon can with ears.CHEMGLAZE Z451 is an aromatic, moisture curing, single-package, ASTMD-16 Type II, oil-free product. The product is recommended for interior applications. Use: to protect metal surface coated with a primer or another...

SOCOGLAZE PT-766 comes in a rough texture, with grit, as TYPE II. SOCOGLAZE PT-766 is a unique formulation of high molecular urethane resins, which cures at ambient temperatures. Approvals and conformities: MIL-SPEC A-A-59166A Ty. II

A-A-59166 (PT-766) has been authorized by GSA as a replacement for MIL-W-5044 TY. I and TY. II. PT-766 is a non-slip coating used for walkways on exterior aircraft surfaces. PT-766 comes is a smooth texture (without grit) as TYPE I and a rough texture...

Industrial Piping Liquid Oxygen Systems Storage Tanks, Drums & Stacks Optical Coating Electrical & Electronic Parts Electronic Cabinets Aircraft & Missile Parts Instrument & Camera Parts Heat Exchanger Fins/Tubes Laboratory Furniture Costume Jewelry...

Industrial Piping Liquid Oxygen Systems Storage Tanks, Drums & Stacks Optical Coating Electrical & Electronic Parts Electronic Cabinets Aircraft & Missile Parts Instrument & Camera Parts Heat Exchanger Fins/Tubes Laboratory Furniture Costume Jewelry...

PT-483 Epoxy Propeller Coating is a general purpose epoxy aerosol. It is intended for use over metal and composite surfaces that are bare, scuffed, sanded, abrasive blasted, primed and previously painted surfaces while showing excellent protection.

PT-785 is a two component high solids low voc catalyst cure aliphatic polyurethane which meets and exceeds MIL-PRF-85285D Type 1 CLASS H. When mixed and reduced according to PTI’s instructions, PT-785 topcoat will conform to most of California’s air...

PT-799 is a two component catalyst cure aliphatic polyurethane which meets, and exceeds, MIL- PRF-85285D/E Type I & II. When mixed and reduced according to PTI’s instructions, PT-799 topcoat will conform to most of California’s air pollution rules and...